System
Product Overview
Check out DEEPSOUND's system equipment
Bipolar pulse wave
DEEPSOUND products use the Bipolar Pulse Wave method, recognized in the field of medical ultrasound technology, to achieve low noise and clean defect images.
Multi Board
The R3 multi-board is available for purchase without external casing.
It is designed to fit into a 19-inch rack system. Create a flexible multi-board system that helps build custom solutions to meet inspection requirements.
Independent system
DEEPSOUND R3 has an HDMI port.
The internal PC of the R3 can run programs independently without an external PC. You can view images on a separate monitor via the HDMI port.
Remote Connection
With the remote connectivity feature of DEEPSOUND P5, you can run inspection programs from a desktop PC or laptop via a LAN port.
Utilize this feature in various work environments or when performing CPU-intensive tasks that demand higher performance.
Build programs using DSK
DSK is a software development kit provided with a DSK Tutorial package to help in developing and researching custom programs.
DEEPSOUND R3 has the advantage of being able to use both PAUT and UT channels simultaneously, expanding the scope of research and development.
PORTS
Front port
Rear port
SPECIFICATIONS
General | |
|---|---|
Weight (Board Only) | 0.5kg |
Size(WxHxD) | 325x100x23mm(Board Only) |
Weight (With Case) | 1.2kg |
Size(WxHxD) | 332x170x82mm(With Case) |
PA/UT Configuration | |
|---|---|
Scan Type | Conventional, TOFD, Sectorial |
A-Scan Height | 300% |
Refresh Rate | 30Hz |
Max PRF | 30kHz |
Effective Digitizing Frequency | 100MHz |
Inputs and Outputs | |
|---|---|
Input Power | DC 12V / 5A |
LAN Port | High Speed (1GB/s) |
PAUT Port | 1 (IPEX 160P Type) |
UT Port | 4 (Lemo Connector Type) |
Encoder | 2-axis / D-Sub 15pin 3row |
HDMI | 1 Port |
USB | 2 Ports |
Phased-Array | |
|---|---|
Channel Group | Up to 8 |
Focal Law | Unlimited |
Max Element | 128 |
Max Channel | 32 |
Scan View | A, B, C, S |
Pulser | |
|---|---|
Rectification | RF, Full Wave |
Pulse Width | 50nsec ~ 2000nsec |
Voltage | 25V ~ 160V |
Max Burst Count | 3 |
Pulse Type | Bipolar Pulse Wave |
Receiver | |
|---|---|
Digital Filter Support | Yes |
Bandwidth | 0.5MHz ~ 20MHz |
Dynamic Sample Focusing | Yes |
Sample Resolution | 16 bit |
